ThinkPad T43で使用している、SSDが見事に死亡。
事前予告無しに死んでくださいました。。
最初、OSが起動出来なくなり、Unknown Hard Errorとなってしまって。。
CD-ROMがないので、KNOPPIXのライブUSBを作成し、SMARTを取得してみました。
最初、別のパソコンに取り付け、IDE-USBで接続したところ、Smartが撮れないので、このような構成に。。
$ cat /home/tomocha/CFD.txt
root@Microknoppix:~# smartctl -a /dev/sda
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: CFD CSSD-PMM64WJ2
Serial Number: XXX
Firmware Version: 110509
User Capacity: 64,023,257,088 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sat Jan 5 13:58:58 2013 JST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 1) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 16777215
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0
5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2485
10 Spin_Retry_Count 0x0013 100 100 050 Pre-fail Always - 0
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 379
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 3
175 Program_Fail_Count_Chip 0x0003 100 100 010 Pre-fail Always - 47
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 040 100 000 Old_age Always - 40 (Lifetime Min/Max 30/60)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
240 Head_Flying_Hours 0x0013 100 100 050 Pre-fail Always - 0
170 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 201867853871
173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 25991776987
SMART Error Log Version: 1
ATA Error Count: 91 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 91 occurred at disk power-on lifetime: 2485 hours (103 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3f 21 8d e1 Error: UNC at LBA = 0x018d213f = 26026303
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 3f 21 8d e1 00 00:01:14.900 READ DMA
c8 00 08 37 21 8d e1 00 00:01:14.900 READ DMA
c8 00 08 2f 21 8d e1 00 00:01:14.900 READ DMA
c8 00 08 27 21 8d e1 00 00:01:14.900 READ DMA
c8 00 08 1f 21 8d e1 00 00:01:14.900 READ DMA
Error 90 occurred at disk power-on lifetime: 2485 hours (103 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 67 20 8d e1 Error: UNC at LBA = 0x018d2067 = 26026087
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 67 20 8d e1 00 00:01:14.500 READ DMA
c8 00 00 67 1f 8d e1 00 00:01:14.500 READ DMA
c8 00 00 67 1e 8d e1 00 00:01:14.400 READ DMA
c8 00 00 67 1d 8d e1 00 00:01:14.400 READ DMA
c8 00 00 67 1c 8d e1 00 00:01:14.400 READ DMA
Error 89 occurred at disk power-on lifetime: 2485 hours (103 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 3f 21 8d e1 Error: UNC at LBA = 0x018d213f = 26026303
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 3f 21 8d e1 00 00:03:54.100 READ DMA
c8 00 08 37 21 8d e1 00 00:03:54.100 READ DMA
c8 00 08 2f 21 8d e1 00 00:03:54.100 READ DMA
c8 00 08 27 21 8d e1 00 00:03:54.100 READ DMA
c8 00 08 1f 21 8d e1 00 00:03:54.100 READ DMA
Error 88 occurred at disk power-on lifetime: 2485 hours (103 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 67 20 8d e1 Error: UNC at LBA = 0x018d2067 = 26026087
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 67 20 8d e1 00 00:03:53.300 READ DMA
c8 00 00 67 1f 8d e1 00 00:03:53.300 READ DMA
c8 00 00 67 1e 8d e1 00 00:03:53.300 READ DMA
c8 00 00 67 1d 8d e1 00 00:03:53.200 READ DMA
c8 00 00 67 1c 8d e1 00 00:03:53.200 READ DMA
Error 87 occurred at disk power-on lifetime: 2485 hours (103 days + 13 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 47 00 2b e6 Error: UNC at LBA = 0x062b0047 = 103481415
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 47 00 2b e6 00 00:03:51.700 READ DMA
c8 00 08 df 00 42 e5 00 00:03:51.700 READ DMA
c8 00 08 e7 00 42 e5 00 00:03:51.700 READ DMA
c8 00 08 ff a9 e3 e4 00 00:03:51.700 READ DMA
c8 00 08 f7 a9 e3 e4 00 00:03:51.700 READ DMA
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
Device does not support Selective Self Tests/Logging
ひどい。。。。1年もたなかったょ。。