Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243825: Tue Dec  4 09:23:10 UTC 2012
    root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Intel Xeon E312xx (Sandy Bridge) (2600.13-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a1  Family = 6  Model = 2a  Stepping = 1
  Features=0xf8bf3ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xffba2203<SSE3,PCLMULQDQ,SSSE3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 19327352832 (18432 MB)
avail memory = 18604638208 (17742 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BOCHS  BXPCAPIC>
FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs
FreeBSD/SMP: 3 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link4: Unable to route IRQs: AE_NOT_FOUND
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc020-0xc03f irq 11 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf2000000-0xf2000fff at device 2.0 on pci0
virtio_pci0: <VirtIO PCI Network adapter> port 0xc040-0xc05f mem 0xf2020000-0xf2020fff irq 11 at device 3.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x711fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,RxModeExtra,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,TxUFO,TxTSOECN,TxTSOv6,TxTSOv4,RxUFO,RxECN,RxTSOv6,RxTSOv4,TxAllGSO,MacAddress,RxChecksum,TxChecksum>
virtio_pci0: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
vtnet0: Ethernet address: 52:54:00:XX:XX:XX
virtio_pci1: <VirtIO PCI Block adapter> port 0xc080-0xc0bf mem 0xf2040000-0xf2040fff irq 11 at device 4.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
virtio_pci1: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk0: 30720MB (62914560 512 byte sectors)
virtio_pci2: <VirtIO PCI Block adapter> port 0xc0c0-0xc0ff mem 0xf2041000-0xf2041fff irq 10 at device 5.0 on pci0
vtblk1: <VirtIO Block Adapter> on virtio_pci2
virtio_pci2: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci2: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk1: 2097152MB (4294967296 512 byte sectors)
virtio_pci3: <VirtIO PCI Balloon adapter> port 0xc100-0xc11f irq 10 at device 6.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci3
virtio_pci3: host features: 0x71000002 <EventIdx,RingIndirect,NotifyOnEmpty,StatsVq>
virtio_pci3: negotiated features: 0x0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
fdc0: <floppy drive controller> port 0x3f2-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROM> at iomem 0xc9000-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
fdc0: No FDOUT register!
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 10156761 Hz quality 1000
Trying to mount root from ufs:/dev/vtbd0p2 [rw]...
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...5 6 0 1 0 0 done
All buffers synced.
Uptime: 15h29m5s
usbus0: Controller shutdown
uhub0: at usbus0, port 1, addr 1 (disconnected)
usbus0: controller did not stop
usbus0: Controller shutdown complete
Rebooting...
cpu_reset: Stopping other CPUs



Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE-p10 #0: Wed Mar 26 14:35:51 JST 2014
    root@www3304.sakura.ne.jp:/usr/obj/usr/src/sys/SAKURA17 amd64
CPU: Intel Xeon E312xx (Sandy Bridge) (2600.13-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a1  Family = 6  Model = 2a  Stepping = 1
  Features=0xf8bf3ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xffba2203<SSE3,PCLMULQDQ,SSSE3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 19327352832 (18432 MB)
avail memory = 18613932032 (17751 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BOCHS  BXPCAPIC>
FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs
FreeBSD/SMP: 3 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link4: Unable to route IRQs: AE_NOT_FOUND
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc020-0xc03f irq 11 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf2000000-0xf2000fff at device 2.0 on pci0
virtio_pci0: <VirtIO PCI Network adapter> port 0xc040-0xc05f mem 0xf2020000-0xf2020fff irq 11 at device 3.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x711fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,RxModeExtra,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,TxUFO,TxTSOECN,TxTSOv6,TxTSOv4,RxUFO,RxECN,RxTSOv6,RxTSOv4,TxAllGSO,MacAddress,RxChecksum,TxChecksum>
virtio_pci0: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
vtnet0: Ethernet address: 52:54:00:XX:XX:XX
virtio_pci1: <VirtIO PCI Block adapter> port 0xc080-0xc0bf mem 0xf2040000-0xf2040fff irq 11 at device 4.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
virtio_pci1: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk0: 30720MB (62914560 512 byte sectors)
virtio_pci2: <VirtIO PCI Block adapter> port 0xc0c0-0xc0ff mem 0xf2041000-0xf2041fff irq 10 at device 5.0 on pci0
vtblk1: <VirtIO Block Adapter> on virtio_pci2
virtio_pci2: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci2: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk1: 2097152MB (4294967296 512 byte sectors)
virtio_pci3: <VirtIO PCI Balloon adapter> port 0xc100-0xc11f irq 10 at device 6.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci3
virtio_pci3: host features: 0x71000002 <EventIdx,RingIndirect,NotifyOnEmpty,StatsVq>
virtio_pci3: negotiated features: 0x0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROM> at iomem 0xc9000-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 10156749 Hz quality 1000
Trying to mount root from ufs:/dev/vtbd0p2 [rw]...
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done

Waiting (max 60 seconds) for system process `syncer' to stop...Syncing disks, vnodes remaining...4 4 2 2 0 0 done
All buffers synced.
Uptime: 2h7m45s
usbus0: Controller shutdown
uhub0: at usbus0, port 1, addr 1 (disconnected)
usbus0: controller did not stop
usbus0: Controller shutdown complete
Rebooting...
cpu_reset: Stopping other CPUs



Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE-p10 #0: Tue Apr  1 13:01:40 JST 2014
    root@wwwXXXXsub.sakura.ne.jp:/usr/obj/usr/src/sys/SAKURA17 amd64
CPU: Intel Xeon E312xx (Sandy Bridge) (2600.13-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a1  Family = 6  Model = 2a  Stepping = 1
  Features=0xf8bf3ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xffba2203<SSE3,PCLMULQDQ,SSSE3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 19327352832 (18432 MB)
avail memory = 18609369088 (17747 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BOCHS  BXPCAPIC>
FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs
FreeBSD/SMP: 3 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link4: Unable to route IRQs: AE_NOT_FOUND
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc020-0xc03f irq 11 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf2000000-0xf2000fff at device 2.0 on pci0
virtio_pci0: <VirtIO PCI Network adapter> port 0xc040-0xc05f mem 0xf2020000-0xf2020fff irq 11 at device 3.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x711fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,RxModeExtra,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,TxUFO,TxTSOECN,TxTSOv6,TxTSOv4,RxUFO,RxECN,RxTSOv6,RxTSOv4,TxAllGSO,MacAddress,RxChecksum,TxChecksum>
virtio_pci0: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
vtnet0: Ethernet address: 52:54:00:XX:XX:XX
virtio_pci1: <VirtIO PCI Block adapter> port 0xc080-0xc0bf mem 0xf2040000-0xf2040fff irq 11 at device 4.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
virtio_pci1: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk0: 30720MB (62914560 512 byte sectors)
virtio_pci2: <VirtIO PCI Block adapter> port 0xc0c0-0xc0ff mem 0xf2041000-0xf2041fff irq 10 at device 5.0 on pci0
vtblk1: <VirtIO Block Adapter> on virtio_pci2
virtio_pci2: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci2: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk1: 2097152MB (4294967296 512 byte sectors)
virtio_pci3: <VirtIO PCI Balloon adapter> port 0xc100-0xc11f irq 10 at device 6.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci3
virtio_pci3: host features: 0x71000002 <EventIdx,RingIndirect,NotifyOnEmpty,StatsVq>
virtio_pci3: negotiated features: 0x0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROM> at iomem 0xc9000-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 10156757 Hz quality 1000
Trying to mount root from ufs:/dev/vtbd0p2 [rw,acls]...
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...17 18 15 3 1 0 0 done
All buffers synced.
Uptime: 14m26s
usbus0: Controller shutdown
uhub0: at usbus0, port 1, addr 1 (disconnected)
usbus0: controller did not stop
usbus0: Controller shutdown complete
Rebooting...
cpu_reset: Stopping other CPUs



Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE-p10 #0: Tue Apr  1 13:01:40 JST 2014
    root@wwwXXXXsub.sakura.ne.jp:/usr/obj/usr/src/sys/SAKURA17 amd64
CPU: Intel Xeon E312xx (Sandy Bridge) (2600.13-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a1  Family = 6  Model = 2a  Stepping = 1
  Features=0xf8bf3ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xffba2203<SSE3,PCLMULQDQ,SSSE3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 19327352832 (18432 MB)
avail memory = 18609369088 (17747 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BOCHS  BXPCAPIC>
FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs
FreeBSD/SMP: 3 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link4: Unable to route IRQs: AE_NOT_FOUND
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc020-0xc03f irq 11 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf2000000-0xf2000fff at device 2.0 on pci0
virtio_pci0: <VirtIO PCI Network adapter> port 0xc040-0xc05f mem 0xf2020000-0xf2020fff irq 11 at device 3.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x711fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,RxModeExtra,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,TxUFO,TxTSOECN,TxTSOv6,TxTSOv4,RxUFO,RxECN,RxTSOv6,RxTSOv4,TxAllGSO,MacAddress,RxChecksum,TxChecksum>
virtio_pci0: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
vtnet0: Ethernet address: 52:54:00:XX:XX:XX
virtio_pci1: <VirtIO PCI Block adapter> port 0xc080-0xc0bf mem 0xf2040000-0xf2040fff irq 11 at device 4.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
virtio_pci1: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk0: 30720MB (62914560 512 byte sectors)
virtio_pci2: <VirtIO PCI Block adapter> port 0xc0c0-0xc0ff mem 0xf2041000-0xf2041fff irq 10 at device 5.0 on pci0
vtblk1: <VirtIO Block Adapter> on virtio_pci2
virtio_pci2: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci2: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk1: 2097152MB (4294967296 512 byte sectors)
virtio_pci3: <VirtIO PCI Balloon adapter> port 0xc100-0xc11f irq 10 at device 6.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci3
virtio_pci3: host features: 0x71000002 <EventIdx,RingIndirect,NotifyOnEmpty,StatsVq>
virtio_pci3: negotiated features: 0x0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROM> at iomem 0xc9000-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 10156762 Hz quality 1000
Trying to mount root from ufs:/dev/vtbd0p2 [rw,acls]...
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...5 5 3 3 0 0 done
All buffers synced.
Uptime: 8d11h20m34s
usbus0: Controller shutdown
uhub0: at usbus0, port 1, addr 1 (disconnected)
usbus0: controller did not stop
usbus0: Controller shutdown complete
Rebooting...
cpu_reset: Stopping other CPUs



Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE-p10 #0: Tue Apr  1 13:01:40 JST 2014
    root@wwwXXXXsub.sakura.ne.jp:/usr/obj/usr/src/sys/SAKURA17 amd64
CPU: Intel Xeon E312xx (Sandy Bridge) (2600.13-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x206a1  Family = 6  Model = 2a  Stepping = 1
  Features=0xf8bf3ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,SS>
  Features2=0xffba2203<SSE3,PCLMULQDQ,SSSE3,CX16,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 19327352832 (18432 MB)
avail memory = 18609369088 (17747 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <BOCHS  BXPCAPIC>
FreeBSD/SMP: Multiprocessor System Detected: 3 CPUs
FreeBSD/SMP: 3 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <BOCHS BXPCRSDT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xb008-0xb00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci_link4: Unable to route IRQs: AE_NOT_FOUND
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ata1: <ATA channel> at channel 1 on atapci0
uhci0: <Intel 82371SB (PIIX3) USB controller> port 0xc020-0xc03f irq 11 at device 1.2 on pci0
usbus0: controller did not stop
usbus0 on uhci0
pci0: <bridge> at device 1.3 (no driver attached)
vgapci0: <VGA-compatible display> mem 0xf0000000-0xf1ffffff,0xf2000000-0xf2000fff at device 2.0 on pci0
virtio_pci0: <VirtIO PCI Network adapter> port 0xc040-0xc05f mem 0xf2020000-0xf2020fff irq 11 at device 3.0 on pci0
vtnet0: <VirtIO Networking Adapter> on virtio_pci0
virtio_pci0: host features: 0x711fffe3 <EventIdx,RingIndirect,NotifyOnEmpty,RxModeExtra,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,TxUFO,TxTSOECN,TxTSOv6,TxTSOv4,RxUFO,RxECN,RxTSOv6,RxTSOv4,TxAllGSO,MacAddress,RxChecksum,TxChecksum>
virtio_pci0: negotiated features: 0x110f8020 <RingIndirect,NotifyOnEmpty,VLanFilter,RxMode,ControlVq,Status,MrgRxBuf,MacAddress>
vtnet0: Ethernet address: 52:54:00:XX:XX:XX
virtio_pci1: <VirtIO PCI Block adapter> port 0xc080-0xc0bf mem 0xf2040000-0xf2040fff irq 11 at device 4.0 on pci0
vtblk0: <VirtIO Block Adapter> on virtio_pci1
virtio_pci1: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci1: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk0: 30720MB (62914560 512 byte sectors)
virtio_pci2: <VirtIO PCI Block adapter> port 0xc0c0-0xc0ff mem 0xf2041000-0xf2041fff irq 10 at device 5.0 on pci0
vtblk1: <VirtIO Block Adapter> on virtio_pci2
virtio_pci2: host features: 0x71000654 <EventIdx,RingIndirect,NotifyOnEmpty,Topology,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
virtio_pci2: negotiated features: 0x10000254 <RingIndirect,FlushCmd,BlockSize,DiskGeometry,MaxNumSegs>
vtblk1: 2097152MB (4294967296 512 byte sectors)
virtio_pci3: <VirtIO PCI Balloon adapter> port 0xc100-0xc11f irq 10 at device 6.0 on pci0
vtballoon0: <VirtIO Balloon Adapter> on virtio_pci3
virtio_pci3: host features: 0x71000002 <EventIdx,RingIndirect,NotifyOnEmpty,StatsVq>
virtio_pci3: negotiated features: 0x0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
uart0: <Non-standard ns8250 class UART with FIFOs> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROM> at iomem 0xc9000-0xc97ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
attimer0: <AT timer> at port 0x40 on isa0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 10156753 Hz quality 1000
Trying to mount root from ufs:/dev/vtbd0p2 [rw,acls]...